Products
Home / Products / Amplifiers / Overview
NEW PRODUCT Powersoft-X4 - Only available with Complete Systems
KEY   FEATURES
MAIN   CHARACTERISTICS
Powersoft X4 innovates and evolves the concept of the amplification platform though the integration of a worldwide compatible power-box and a full feature DSP inside the power amplifier.

The complete digital audio signal management system based on ARM Cortex A-8 processor and TI C6000 DSP platform heralds new and innovative level of signal processing, providing non-boolean routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 4 s in input processing and 200 ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters and Active DampingControl™.

The power supply permits worldwide AC acceptance and direct connection to any regional power line configuration: it is now suitable to Single Phase, Bi-Phase or Three Phase operation from 85 VAC up to 440 VAC without need of manual selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design.
General
  • Number of Channels:
  • 4
AC Main Power
  • Single Channel Mode (2Ω):
  • 5200W
  • Single Channel Mode (4Ω):
  • 3000W
  • Single Channel Mode (8Ω):
  • 1600W
  • Bridge Mode (4Ω):
  • 10400W
  • Bridge Mode (8Ω):
  • 6000W
  • Max Output Voltage / Current:
  • 175Vpeak / 130Apeak
Thermal
  • Power Supply:
  • Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
  • Operating Voltage:
  • 85V - 440V
Audio
  • Operating Temperature Range:
  • 0°-45°C - 32°-113°F
  • THD+N:
  • < 0.5% (typically < 0.01%)
  • IMD:
  • < 0.5% (typically < 0.01%)
  • Input Impedance:
  • 20kΩ balanced
  • Slew Rate:
  • > 50V/μs
  • Damping Factor:
  • > 5000 @ 8Ω, 20Hz - 500Hz
DSP
  • Noise Floor:
  • -70dBV (20 Hz - 20 kHz, A weighted)
  • DSP Architecture:
  • ARM Cortex A-8 processor and TI C6000 DSP platform
  • AD Converter:
  • Dual 24 bit 96 kHz Tandem® architecture with 127dBA of dynamic range
  • DA Converter:
  • Dual 24bit 96kHz Tandem® architecture with 122dBA of dynamic range
  • Internal Precision:
  • 40bit floating point
  • Firmware:
  • Network upgradable firmware
  • Input Equalizer:
  • Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Output Equalizer:
  • Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossover:
  • Linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6dB/oct to 48dB/oct (IIR)
  • Delay:
  • up to 4s on input section; up to 200ms per output for time alignment
  • Limiters:
  • TruePower™, RMS voltage, RMS current, Peak limiter
  • Damping Control:
  • Active DampingControl™
Construction
  • Dimensions (WxHxD):
  • 483mm x 44mm x 495mm (19.02 x 1.73 x 19.49in)
@ NEXT-proaudio 2005-2017. All rights reserved.