Products
Home / Products / LA Series / Overview
LAs118A - Active Hybrid-Horn Arrayable Subwoofer
KEY   FEATURES
  • 2960Wprg amplification
  • Small, Versatile, Loud
  • Superior bass impact thanks to horn design
  • High SPL and low distortion
  • Fast, simple Integrated Rigging hardware
MAIN   CHARACTERISTICS
  • Type: Active Hybrid-Horn Subwoofer
  • Freq. Resp. (-6dB): 38Hz - 160Hz
  • Maximum SPL: 136.4dB/139.4dB (Half-space)
  • Dimensions (WxHxD): 602 x 664 x 750 mm
The Active Hybrid-Horn Arrayable Subwoofer LAs118A is equipped with a custom made B&C, long excursion, 18" neodymium woofer and is internally powered by a DPAmplifier module. As it shares the same rigging technology with the LA122A and LA122WA, a flexible integration, both on the ground or on the top of the LA122A arrays, is possible. In addition it may also be used in arrays consisting entirely of LAs118A subwoofers.

The integrated DSP with A/D-D/A low noise converters, provides eight selectable presets (six factory defined and two user-defined) that can be accessed by an easy selector, located on the front module panel or real time edited by a PC, using the supplied Soundware software, via USB remote control. This permits easy customization of the sound programme, for various applications or different venues. An intelligent automatic standby mode is activated when the amplifier detects no input signal, saving energy and extending the expected work life.

With the Soundware software is possible to edit the six pre-loaded presets and store them either of the two free memories. Editable parameters are input equalization, input delay, input high-pass/low-pass filters and the 'bass enhancer' function. A total of 255 units can be controlled simultaneously by the software.
Technical Data
  • Speaker Type:
  • Active Hybrid-Horn Subwoofer
Acoustical Data
  • Frequency Response (-6dB):
  • 38Hz - 160Hz
  • Calculated Max. SPL (Cont/Peak):
  • 136.4dB/139.4dB (Half-space)
Drivers
  • Low Frequency:
  • 1 x 18" (460mm), 4" (100mm) VC, B&C custom speaker
Electrical Data
  • Connectors:
  • Signal: 2 x XLR ; Power: 2 x powerCON
Amplifier Module
  • Amplifier Technology:
  • Switched mode class D with DSP
  • Section Power (RMS/Program/Peak) LF:
  • 2200W/2960W/5920W
  • Controller:
  • PC controlled Networkable DSP 24bit/48kHz
  • System Presets:
  • 6 Factory and 2 User, selectable via software or rear panel switch
  • PC Control:
  • Via RS485 and suplied software "SOUNDWARE"
  • DSP Adjustable Parameters:
  • 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
  • AC Operating Voltage:
  • 180V - 245VAC
  • Nominal Power Consumption:
  • 770W
Enclosure
  • Dimensions (WxHxD):
  • 602 x 664 x 750mm (23.7 x 26.14 x 29.53in)
  • Net Weight:
  • 67.3kg (148.4lb)
LAs118A Accessories
  • NC75527
    NEXT Individual Dolly for LAs118.v2/A
  • TX53701
    NEXT Individual Cover for LAs118.v2/A to use w/ Dolly
  • TX12402
    NEXT Individual Rain Cover for LA122A/LA122WA/LAs118A
  • VP60053
    NEXT Lock Pin for Flying System v2
We have 3 Products Related with LAs118A
NEXT-proaudio 2005-2022. All rights reserved.
To leverage user experience, this site uses cookies. By scrolling this page, or closing this message, you are accepting its usage. ×